Development and maintenance is sponsored by Blish.

This is a AlchemyCMS and Solidus integration gem.

1. It provides tabs in Alchemy and Solidus menus to easily switch between both backends
2. It offers two new Essences for Alchemy called EssenceSpreeProduct and EssenceSpreeTaxon that you can use to place Spree products and/or Taxons on your pages.
3. Shares admin sessions and user abilities between Alchemy and Solidus.

This version runs with Solidus v4.0 and up.

• For a Solidus 3.x compatible version please use the 6.3-stable branch or 6.3.1 gem version.
• For a Solidus < 2.11 compatible version please use the 3.1-stable branch or 3.3.0 gem version.
• For a Solidus < 2.6 compatible version please use the 2.3-stable branch or 2.3.2 gem version.
• For a Solidus 1.x compatible version please use the 1.0-stable branch or 1.1.0 gem version.

NOTE: If you are using Solidus v3.0 with Alchemy v5.3, make sure to also use Rails v6.0 and the legacy image attachment adapter (paperclip) and not the active storage adapter, since this needs Rails >= 6.1 and Alchemy v5.3 is not Rails 6.1 compatible. You need Alchemy v6.0 for Rails >= 6.1.

This version runs with Alchemy v7.2

• For a Alchemy 7.0/7.1 compatible version please use the 7.2-stable branch or 7.2 gem version.
• For a Alchemy 6.x compatible version please use the 5.0-stable branch or 5.0 gem version.
• For a Alchemy 5.x compatible version please use the 4.1-stable branch or 4.1 gem version.
• For a Alchemy 4.x compatible version please use the 3.1-stable branch or 3.3 gem version.
• For a Alchemy 4.0 compatible version please use the 2.3-stable branch or 2.3 gem version.
• For a Alchemy 3.x compatible version please use the 1.0-stable branch or 1.1 gem version.

Add this line to your applications Gemfile:

gem 'alchemy-solidus', '~> 7.0'

Install the gem with:

$ bundle install

Recommended

We ship a Rails generator that helps you to install this gem into your existing application.

$ bin/rails g alchemy:solidus:install

There are several options available, please check them with

$ bin/rails g alchemy:solidus:install --help

To upgrade update the Gemfile and run the install generator again

$ bin/rails g alchemy:solidus:install

NOTE Please make sure to remove the Alchemy::Modules.register_module part from your config/initializer/alchemy.rb file if upgrading from 2.5.

For regular setups we recommend the automated installer mentioned above. But if you know what you are doing and want to have full control over the integration you can also set this up manually.

Both Alchemy and Solidus come without an authentication system in place. You will need to choose an authentication system yourself. There are 3 available options. Whichever you choose, you need to instruct Solidus & Alchemy about your choice of authentication system.

Here are the steps for each option:

Recommended for:

• An existing Solidus installation (gem 'solidus_auth_devise' should already be in your Gemfile).
• You are just adding Alchemy

To use Solidus Auth Devise, instruct Alchemy to use the Spree::User class:

# config/initializers/alchemy.rb
Alchemy.user_class_name = 'Spree::User'
Alchemy.current_user_method = :spree_current_user

If you put Spree in it's own routing namespace (see below) you will want to let Alchemy know these paths:

# config/initializers/alchemy.rb
Alchemy.login_path = '/store/login'
Alchemy.logout_path = '/store/logout'

Recommended for:

• An existing Alchemy installation
• You don't have an authentication system and don't want to role an authentication system on your own.

Add alchemy-devise to your Gemfile

# Gemfile
gem 'alchemy-devise', '~> 4.1'

and install it:

$ bundle install
$ bundle exec rails g alchemy:devise:install

Run the Solidus installer:

NOTE: Skip this if you already have a running Solidus installation.

$ bundle exec rails g spree:install

Then run the solidus custom user generator:

$ bundle exec rails g spree:custom_user Alchemy::User

Now you'll need to instruct Solidus to use the Alchemy User class:

# config/initializers/spree.rb
...
Spree.user_class = "Alchemy::User"
...

and tell Solidus about Alchemy's path helpers:

# lib/spree/authentication_helpers.rb
    ...
    def spree_login_path
      Alchemy.login_path
    end

    def spree_signup_path
      Alchemy.signup_path
    end

    def spree_logout_path
      Alchemy.logout_path
    end
    ...

Please follow the Solidus custom authentication and the Alchemy custom authentication guides in order to integrate your custom user with Solidus and Alchemy.

Install the migrations

$ bundle exec rake alchemy_solidus:install:migrations

Run the installer of Alchemy

$ bundle exec rake alchemy:install

and follow the on screen instructions.

If you plan to render the Alchemy site in the Solidus layout add the following to your initializer:

# config/initializers/alchemy.rb
require 'alchemy/solidus/use_solidus_layout'

NOTE: Since v2.5.2 this is done automatically for you. If you upgraded from an older version you can safely remove this from your initializers.

If you plan to render Alchemy content in your Solidus views (ie. a global header or footer section), you need to include the Alchemy view helpers and language store in your Solidus controllers with the following addition to your initializer:

# config/initializers/alchemy.rb
require 'alchemy/solidus/alchemy_in_solidus'

NOTE: Since v2.5.2 this is done automatically for you. If you upgraded from an older version you can safely remove this from your initializers.

For routing you have a few options.

# config/routes.rb
mount Spree::Core::Engine => '/store'
mount Alchemy::Engine => '/pages'

# config/routes.rb
mount Alchemy::Engine => '/pages'
mount Spree::Core::Engine => '/'

# config/routes.rb
mount Spree::Core::Engine => '/store'
mount Alchemy::Engine => '/'

# config/routes.rb

# Make Alchemy's root page have higher priority than Spree's root page
root to: 'alchemy/pages#index'

mount Spree::Core::Engine => '/'

# Must be last so it's catch-all route can render undefined paths
mount Alchemy::Engine => '/'

Please make yourself familiar with AlchemyCMS by reading the guidelines

# config/alchemy/elements.yml
- name: product
  ingredients:
    - role: spree_product
      type: SpreeProduct

- name: product_category
  ingredients:
    - role: spree_taxon
      type: SpreeTaxon

$ rails g alchemy:elements --skip

# config/alchemy/page_layouts.yml
- name: product
  elements: [product]
- name: products
  elements: [product_category]

You can mix Alchemy and Solidus content in the same view.

<!-- app/views/alchemy/elements/_product_view.html.erb -->
<% cache element do %>
  <%= element_view_for element do |el| %>
    <% product = el.value(:spree_product) %>
    <h1><%= product.name %></h1>
    <p><%= product.description %></p>
    <%= el.render :text %>
    <%= el.render :image %>
  <% end %>
<% end %>

Or for a list of taxon products

<!-- app/views/alchemy/elements/_product_category_view.html.erb -->
<% cache element do %>
  <%= element_view_for element do |el| %>
    <h2><%= el.render :headline %></h2>
    <%= el.render :description %>

    <% taxon = el.value(:spree_taxon) %>
    <% taxon.products.each do |product| %>
      <%= link_to product.name, spree.product_path(product) %>
    <% end %>
  <% end %>
<% end %>

Alchemy ❤️ Solidus!

1. Fork it
2. Create your feature branch (git checkout -b my-new-feature)
3. Commit your changes (git commit -am 'Added some feature')
4. Push to the branch (git push origin my-new-feature)
5. Create new Pull Request