Browsery

Browsery is a browser automation test framework built on top of minitest and selenium-webdriver.

• multiple OS/browser UI automation testing for multiple web apps
• local/remote test execution(Saucelabs, Browserstack, etc)
• process level parallelization for simultaneous tests execution
• page object design supports widgets and sections to minimize code redundancy
• visual regression - continuous visual comparision, customizable diff percentage
• test case documents integration - updates test cases on Google sheets after test run

When running locally (with a browser installed on the same machine), all you need is a supported version of the operating system and browser combination.

For example, to run against Firefox, all you need to do is run tests with the firefox connector (which uses the firefox bridge). The connector (and the bridge behind it) will automatically start the browser in the desired mode.

I no longer recommend installing/using PhantomJS because of its instability.

On Mac OS X, PhantomJS can be installed on HomeBrew. Once you have HomeBrew installed, and brew doctor returns an all okay, you can:

$ brew install phantomjs

and it should be installed in a minute or so. Before any test are run, you'll want to start PhantomJS:

$ phantomjs --webdriver=127.0.0.1:8910

Those parameters are compatible with the phantomjs connector supplied in this project. It can also be run on a different machine; adjust the hostname and port number parameters as necessary.

The simplest way to install it is to use Bundler.

Add Browsery (and any other dependencies) to a Gemfile in your project’s root:

gem 'browsery'

then install it by running Bundler:

$ bundle

All configuration files should be placed under the config/browsery/ directory. There are configuration files that are required for it to work properly:

• Tests directory structure, in config/browsery/tests.yml, which define tests directory's relative path and multi-host flag;
• Connector profiles, in config/browsery/connectors/*.yml, which define WebDriver properties, e.g., Firefox, SauceLabs;
• Environment profiles, in config/browsery/environments/*.yml, which define which environment tests are going to run against, e.g., QA, production;
• Test Suite definition, in config/browsery/test_suite.yml, which defines tags being used to mark tests for different suites, eg. :non_regression

A typical config file structure looks like this:

config/
└── browsery
    ├── connectors
    │   ├── firefox.yml
    │   ├── phantomjs.yml
    │   └── saucelabs.yml
    ├── data
    │   └── sitemap_states.yml
    ├── environments
    │   ├── baidu_ci.yml
    │   ├── baidu_qa.yml
    │   ├── google_ci.yml
    │   └── google_qa.yml
    ├── test_suite.yml
    └── tests.yml

A Tests Directory Structure file is a regular YAML file, which tells browsery where to find tests and which tests to load.

A typical config file for this looks like:

---
tests_dir:
    relative_path: 'web_tests'
    multi-host: true

It defines two things:

1. Tests dir relative path(no trailing slash) - same directory where directories test_cases and page_objects are located, eg. web_tests, xxx/yyyy/tests;
2. multi-host flag: false means test_cases dir is directly under tests_dir, true means there's one more layer in middle: tests_dir/[hosts]/.

A connector profile is a regular YAML file in a specific directory, which describes how tests are run.

It should contain, at minimum, the driver key, which corresponds to the browser argument to Selenium::WebDriver.for, which in turn is one of the bridge types available. As of selenium-webdriver version 2.37.0, the values are:

• firefox or ff for a local version of Firefox;
• internet_explorer or ie for a local version of IE (Windows only);
• chrome for a local version of Google Chrome;
• opera for a local version of Opera;
• safari for a local version of Safari;
• phantomjs for a local or remote instance of PhantomJS;
• android for a local version of the Android emulator on port 8080;
• iphone for a local version of the iPhone emulator on port 3001, which has been deprecated in favor of a remote hub connection, e.g., to appium.io or any such alternative; and
• remote, which is the generic remote bridge.

Overall, the bridge types are separated into two: local and remote. Whereas a local bridge usually takes care of starting an internal server automatically, a remote bridge is a service that is running a daemon (usually WebDriver Hub) on a specific address-and-port combination.

For local bridges, the driver key is the only key necessary in the profile:

---
driver: 'firefox'

some local bridges may support multiple versions of the same browser, but you are on your own to set that up.

For remote bridges, you'll usually need the correct driver and hub.url keys in the profile, e.g., for a PhantomJS instance running on port 8910 on a remote host:

---
driver: 'phantomjs'
hub:
    url: 'http://some_address.com:8910'

Of course, this assumes that the remote bridge doesn't require authentication. For anything else, you'll need to specify the optional hub.user and hub.pass keys:

---
driver: 'phantomjs'
hub:
    url: 'http://some_address.com:8910'
    user: 'username'
    pass: 'password'

A more generic option for remote drivers is the remote bridge type. In our case with PhantomJS, this also works, although your driver's capabilities may not be set up correctly (and you may run into problems if the website you are testing attempts to detect touch events, for instance):

---
driver: 'remote'
hub:
    url: 'http://some_address.com:8910'
    user: 'username'
    pass: 'password'

With any WebDriver Hub, though, this generic remote bridge is exactly what is required. A hub is an HTTP interface that multiplexes sessions on various different browsers, machines, and across many versions, through one URL.

One great example is SauceLabs, which has over 30 different combinations of testing platforms. Unfortunately, in order to configure the multiplexing, you will need to set up different profiles for each combination. This is where overrides come in. Let's take, for example, this profile:

---
driver: 'remote'
hub:
    url: 'http://address.com/wd/hub'
overrides:
    qateam:
        hub:
            user: 'qateam'
            pass: '1234'
    prodteam:
        hub:
            user: 'prodteam'
            pass: '5678'
    linux_ff20:
        archetype: 'firefox'
        capabilities:
            version: '20.0'
            platform: 'linux'
    linux_chrome31:
        archetype: 'chrome'
        capabilities:
            version: '31'
            platform: 'linux'

Assuming the above profile is placed into saucelabs.yml, then when we run tests with the connector profile saucelabs:qateam:linux_ff20, Browsery would have calculated the following effective profile:

---
driver: 'remote'
hub:
    url: 'http://address.com/wd/hub'
    user: 'qateam'
    pass: '1234'
archetype: 'firefox'
capabilities:
    version: '20.0'
    platform: 'linux'

where the contents of the keys overrides.qateam and overrides.linux_ff20 are promoted to the root of the profile, and everything else under overrides is removed.

Now, the effective profile has a couple of new keys:

• archetype is used to signal to the remote driver what bridge it should use in turn to connect to the browser on their end; while
• capabilities is a hash, determined by the remote driver, containing any number of capability values that the browser should support.

Capabilities are usually determined by the remote webservice, and as such, refer to the vendor's documentation on the valid values and examples. See also the top of each connector profile file for a brief description, if any.

Additionally, some drivers also support timeout values under the timeouts key, which can in turn contain the following keys, each taking a value, in number of seconds:

• driver defines the length of time that the bridge will wait for a response from the driver;
• implicit_wait defines the length of time that the bridge will ask the driver to continuously poll the browser for a command, such as finding one or more elements on the current page;
• page_load defines the amount of time the driver will wait for a page to load before giving up and returning an error; and
• script_timeout defines the amount of time the driver will allow JavaScript to be executed on a specific page before halting execution and returning an error to the bridge.

An example of the timeouts:

---
driver: 'phantomjs'
hub:
    url: 'http://some_address.com:8910'
timeouts:
    driver: 90
    implicit_wait: 90

It is important to note that not all drivers support all timesouts. The timeouts.driver and timeouts.implicit_wait are the two safest to rely upon. In general, timeouts.driver should be the longest of the timeouts, if specified, because otherwise, the page could timeout after the driver does, causing a false negative in the test (and often a cryptic error message).

An environment profile is a regular YAML file in a specific directory, which describes against what environment tests are run.

Only one key is required: root, which points to the root URL for the environment:

---
root: 'http://www.env.host_address.com'

Environment variable as value of root is also supported, eg.

---
root: <%= ENV['DYNAMIC_APP_URL'] %>

A typical test suite configuration file looks like this:

----
regression:
    tag_to_exclude: :non_regression

• Regression

  • Integration
  • Non-integration

• Non-regression

  • Automated test that is not testing (user) features. Examples: link checker(mainly for sitemap), events(tracking, logging)

When adding a new test, it'll be part of regression suite by default. To make it part of integration in addition to regression, add tag :integration; To exclude it from regression, add tag :non_regression (by default), or find the appropriate tag_to_exclude in config/browsery/test_suite.yml

As of v1.1, browsery now supports automatically updating test plans stored in Google Sheets.

To make this work, you will first need to set up OAuth2 access by setting up a project in the Google Developers Console and obtaining a client ID and client Secret. More information can be found here: https://developers.google.com/identity/protocols/OAuth2

Place your client ID and client Secret in a new file at the following location: config/browsery/google_drive_config.json (See config/browsery/google_drive_config.sample.json for an example)

At the end of each test, you will need to place the following line: Browsery.google_sheets.update_cells('Test_Result', 'Test_ID') if Browsery.settings.google_sheets?

• Replace Test_Result with the text that you would like to be printed to the sheet after your test has passed
• Replace Test_ID with the unique identifier for the test - this must match what is in your sheet

In your Google Sheets spreadsheet, add a column with 'Automation Serial Key' in the top cell For each test, add the unique identifier that corresponds to Test_ID above in this column for the applicable row

When running a test, use the -g or --google_sheets parameter followed by the ID of your spreadheet. Ex: -g 5xFshUc5kdXcHwKSIE4idIKOW-jdk5c5x5ed4XkhX4kl You can find the ID in the URL for your google sheet spreadsheet before the '/edit': https://docs.google.com/spreadsheets/d/5xFshUc5kdXcHwKSIE4idIKOW-jdk5c5x5ed4XkhX4kl/edit#gid=198261705

The first time you run a test with a google sheet update, you will be prompted to go to a URL and enter the string found there. After this, there will be additional information added to your google_drive_config.json that will include a refresh token - if the refresh token expires, you will need to repeat this step.

See the Configuration section above to have the minimum setup before running tests.

To run test headlessly on default environment(stg), set connector to GhostDriver, which is Phantomjs's implementation of webdriver protocal, run:

$ bundle exec browsery --connector=phantomjs

To override the connector to your local browser, and to override environment, use these options:

$ bundle exec browsery --connector=firefox --env=qa

which will use config/browsery/connectors/firefox.yml and config/browsery/environments/qa.yml as the profiles.

Some profiles may contain a section named overrides, for example, to support multiple browsers in a remote execution environment like SauceLabs. Such profiles can be used like this:

$ bundle exec browsery --connector=saucelabs:linux_ff20 --env=google_qa

which will use the linux_ff20 override in the saucelabs connector profile, and run tests against the google_qa environment. Multiple overrides may be specified one after the other, after the profile name, and always separated by colons, for example:

$ bundle exec browsery -c saucelabs:linux_ff20:qateam:notimeouts -e google_qa

To make a specific connector or environment profile always be the default on your machine or shell session, set the BROWSERY_CONNECTOR or BROWSERY_ENV environment variables respectively. For example, you can add the following to your shell profile (.bash_profile for bash or .zlogin for zsh):

export BROWSERY_CONNECTOR=firefox
export BROWSERY_ENV=google_qa

Refer to the Configuration section above for advanced use cases, and refer to browsery -h for a complete list of command line options.

Assuming you have a test in Browsery::TestCases::Search that is defined as:

test :search_zip, tags: [:homepage, :srp, :zip, :critical] do
    # Assertions go here
end

then you have a couple of different options to run it. The most straight- forward case is to run all test cases:

$ bundle exec browsery

As a second option, you can run only that specific test case. For that, you'll need to know the name of the test case, and add test_ in front of it. In the example above, the name is search_zip, so it can be run like so:

$ bundle exec browsery -n test_search_zip

As a third option, you can run any test case whose name contains the word "search" in it:

$ bundle exec browsery -n /search/

It should be noted that this form supports regular expressions so that:

$ bundle exec browsery -n '/search_\d{5}/'

will run all test cases with the word search_ followed by five digits. Keep in mind that special characters such as backslashes and curly braces must either be escaped, or quoted.

The fourth option is to run test cases that match one or more tags. To run all test cases with the tag :srp, we can:

$ bundle exec browsery -t srp

The -t option is powerful, because it supports multiple tags. To run all test cases tagged with :homepage and :srp, use:

$ bundle exec browsery -t homepage,srp

To run all test cases tagged with :homepage or tagged with :srp (or both):

$ bundle exec browsery -t homepage -t srp

And of course, the combination also works:

$ bundle exec browsery -t srp,submarket -t srp,zip

But what about tests you want NOT to run, that are slow or test functionality you know is broken? If your preferences correspond to a certain tag (say, :slow), you can negate that tag by prefixing it with '!', which may need to be quoted or escaped in some shells/contexts.

$ bundle exec browsery -t 'mygoogle,!slow' # skip slow mygoogle tests
$ bundle exec browsery -t mygoogle,\!slow  # likewise
$ bundle exec browsery -t \!search       # run all non-search tests

Note, every test has a tag added automatically during run time, the tag is formatted by removing all underscores from name of a class, and prefixing it with "class_". For example, to run all tests in sign_in.rb,

$ bundle exec browsery -t class_signin

It's not good style to clutter your code with puts messages. Instead, use the handy built-in logger facility defined in Browsery::Utils::Loggable, accessible through the 'logger' method in TestCase and PageObject objects, like so:

test :my_fancy_test, tags: [:fancy] do self.logger.debug "Let's get fancy!" end

The logger prints messages to logs/browsery.log. You won't see debug messages there by default; for that you need to go beyond --verbose and add an extra 'v' to your flags:

$ bundle exec browsery -t fancy -vv

For more info on TAP (Test Anything Protocol), see also: http://www.testanything.org/

The option in browsery is:

--tapy Use TapY reporter. --tapj Use TapJ reporter.

The TapY is YAML, and the TapJ is JSON output.

TAPOUT gets test result from TapY or TapJ, then output result using a reporter by your choice. To see a list of options and reporters from gem TAPOUT,

$ tapout --help

To use our custom reporter, FancyTapReporter,

$ bundle exec browsery --tapy | tapout -r $(bundle show browsery)/lib/tapout/custom_reporters/fancy_tap_reporter.rb fancytap

To make it presentable to jenkins or other webpage, supress color/highlight codes,

$ bundle exec browsery --tapy | tapout --no-color -r $(bundle show browsery)/lib/tapout/custom_reporters/fancy_tap_reporter.rb fancytap

Test cases should be added as a class under Browsery::TestCases (plural), and inherit from the class Browsery::TestCase (singular).

The setup and teardown methods should be added as class attributes:

module Browsery
    module TestCases
        class LeaseReport < TestCase

            setup do
                # Contents of the setup
            end

            teardown do
                # Contents of the teardown
            end

        end
    end
end

This approach is used in order to allow us to compose our objects correctly and allow the inheritance chain to always be respected. The alternative to this is the normal setup and teardown methods, but a super() must always be called at the beginning and at the end of each, respectively. By using class attributes, we don't need to do anything else special.

Similarly, test cases should be provided as an attribute on the class:

class LeaseReport # continuing from the example above, it already inherits

    test :arbitrary_name, tags: [:foo, :bar] do
        # Contents of test here, with assert_* calls
    end

end

See {Running a Subset of Tests} for information on the tags option.

Parts of a page should be added under Browsery::PageObjects::Components, and overlays should be added under Browsery::PageObjects::Overlay.

Because of WebDriver's asynchronous nature, the order of operations is never guaranteed. When casting a page to another page, the cast call should happen right after the action that causes the page to change. For example, if clicking on a link causes the page to move to another page, the cast should happen after the click, and before anything else:

def some_action!
    @driver.find_element(:id, 'main-link').click
    # There should be nothing in between these two lines; in fact, the
    # cast should be the last line of the method
    cast(:new_page)
end

Page object methods that return a different page must end in !, signifying that is returns a different page object, thus invalidating the current page object. Page object invalidation is handled automatically through the use of ruby object freezing.

An Overlay represents a portion (an element) of a page that can be repeated Multiple times across many pages. But only appear once per page at a time. Some examples of overlays include: -Password -Hotlead Overlays will be called via Includes on the page object, when accessing overlays its best to return the current page as an object, ie: #Check Availability link on srp, # Return +HotLead+s representing hotlead overlay on # the SRP. def check_availability! @driver.find_element(*LINK_CHECKAVAILABILITY).click cast(:search) end Overlays are technically not new pages, and should be differentiated from actual pages.

A widget represents a portion (an element) of a page that is repeated or reproduced multiple times, either on the same page, or across multiple page objects or page modules.

• Always use local variables, unless absolutely necessary, then use instance variables. Avoid constants and class variables unless you know what you're doing. Never use global variables.

• To keep track of configuration settings, see the CONFIGURATION section above.

• If you need to keep track of global state, you're doing it wrong. If you need configuration settings, see previous bulletpoint.

• Comment your code. All methods must be commented, but you shouldn't add a comment every line.

• Always explicitly open your modules and class definitions, e.g., use:

    module A
        module B
            class C
                # code goes here
            end
        end
    end
  

  instead of:

    class A::B::C
        # code goes here
    end
  

  because the latter will not properly resolve class names. See this blog post for an explanation. There are other alternatives, such as ActiveSupport::Dependencies, which brings other caveats to the table.

• Indent all Ruby code using 2 spaces.

• Page object methods that return a different page must end in a !.

I receive a Net::ReadTimeout when running my tests.

The cause for Net::ReadTimeout is usually one of two things:

• a temporary error caused by one or more external elements on the page that blocks the browser from loading the page in its entirety; or
• a permanent error caused by the driver timeout being too low. See connector profiles and the timeouts.driver key.

I receive a 401, 404 or other HTTP errors before even running my tests.

HTTP status codes can be returned by the browser, or by the driver. If the browser is returning those codes, then it is outside the scope of this page.

If, however, the driver is returning those codes, then there are several possible reasons:

• on a 400, the bridge command is most likely sending an incomplete request, and could mean that the bridge doesn't support certain features of the driver;
• on a 401, you are most likely not using the correct username and password for the hub URL (the hub.user and hub.pass keys);
• on a 404, you are most likely using an invalid command, possibly a command that is not supported by the remote hub, or by the browser on the remote hub;
• on a 405, you are using a custom command incorrectly, e.g., using a GET to the hub, rather than a POST;
• on a 501, the bridge (the ruby side) uses too new of a version compared to the driver or browser, and a browser upgrade is usually recommended, or if necessary, adjust the list of capabilities.

In addition to regular HTTP status codes, the bridge also understands the standardized Response Status Codes as defined in the Selenium WebDriver JSON Wire Protocol.

I receive a StaleElementReferenceError (or similar sounding name) intermittently when running one or more tests.

A stale element reference is a reference to an element that is no longer active on the page. This usually happens when you find an element on a page, go a different page (either by get()ing a new URL or by interacting with an element), and then try to perform actions against the aforementioned element on the page.

1. Fork it
2. Create your feature branch git checkout -b my-new-feature
3. Commit your changes git commit -am 'Add some feature'
4. Push to the branch git push origin my-new-feature
5. Create new Pull Request

Browsery is released under the MIT License. See the bundled LICENSE file for details.