Forward3D has not used cap-ec2 in production for several years, and thus we will no longer be maintaining this.

Cap-EC2 is used to generate Capistrano namespaces and tasks from Amazon EC2 instance tags, dynamically building the list of servers to be deployed to.

Cap-EC2 is only compatible with Capistrano 3.x or later; if you want the Capistrano 2.x version, use Capify-EC2. Note that the configuration file (config/ec2.yml) is not compatible between versions either.

This documentation assumes familiarity with Capistrano 3.x.

A number of features that are in Capify-EC2 are not yet available in Cap-EC2, due to the architectural changes in Capistrano 3.x. The following features are missing (this is not an exhaustive list!):

• rolling deploy (this should be implemented via SSHKit)
• ELB registration/de-registration (not widely used)
• Variables set by EC2 tags
• Connecting to instances via SSH using a convenience task

Pull requests for these would be welcomed, as would sending feedback via the Issues on this project about features you would like.

gem install cap-ec2

or add the gem to your project's Gemfile.

You also need to add the gem to your Capfile:

require "cap-ec2/capistrano"

Configurable options, shown here with defaults:

set :ec2_config, 'config/ec2.yml'

set :ec2_project_tag, 'Project'
set :ec2_roles_tag, 'Roles'
set :ec2_stages_tag, 'Stages'
set :ec2_tag_delimiter, ","

set :ec2_profile, 'myservice'       # use ~/.aws/credentials with profile_name
set :ec2_access_key_id, nil
set :ec2_secret_access_key, nil
set :ec2_region, %w{} # REQUIRED
set :ec2_contact_point, nil

set :ec2_filter_by_status_ok?, nil

cap-ec2 supports multiple methods of configuration. The order of inheritance is: YAML File > ~/.aws/credentials > User Capistrano Config > Default Capistrano Config > ENV variables.

:ec2_region is an array of AWS regions and is required. Only list regions which you wish to query for instances; extra values simply slow down queries.

If :ec2_access_key_id or :ec2_secret_access_key are not set in any configuration the environment variables AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY and AWS_REGION will be checked and the default credential load order (including instance profiles credentials) will be honored.

• project_tag

  Cap-EC2 will look for a tag with this name when searching for instances that belong to this project. Cap-EC2 will look for a value which matches the :application setting in your deploy.rb. The tag name defaults to "Project" and must be set on your instances.

• stages_tag

  Cap-EC2 will look for a tag with this name to determine which instances belong to a given stage. The tag name defaults to "Stages".

• roles_tag

  Cap-EC2 will look for a tag with this name to determine which instances belong to a given role. The tag name defaults to "Roles".

• tag_delimiter

  When Cap-EC2 reads a tag value, this will be the default delimiter. For example, for a Roles tag with web,db and tag_delimiter set to ,(comma) the server will have the web and db roles.

• filter_by_status_ok?

  If this is set to true, then Cap-EC2 will not return instances which do not have both EC2 status checks as OK. By default this is set to nil, so Cap-EC2 can return you instances which don't have OK status checks. Be warned that just-launched instances take a while to start returning OK.

If you'd prefer do your configuration via a YAML file config/ec2.yml can be used, (or an alternative name/location set via set :ec2_config):

If so YAML file will look like this:

access_key_id: "YOUR ACCESS KEY"
secret_access_key: "YOUR SECRET KEY"
regions:
 - 'eu-west-1'
project_tag: "Project"
roles_tag: "Roles"
stages_tag: "Stages"

Your config/ec2.yml file can contain (access_key_id, secret_access_key, regions) - if a value is omitted then the order of inheritance is followed.

Imagine you have four servers on EC2 named and tagged as follows:

Imagine also that we've called our app "testapp", as defined in config/deploy.rb like so:

set :application, "testapp"

To define a role, edit config/deploy/[stage].rb and add the following:

ec2_role :web

Let's say we edited config/deploy/production.rb. Adding this configuration to the file would assign the role :web to any instance that has the following properties:

• has a tag called "Roles" that contains the string "web"
• has a tag called "Project" that contains the string "testapp"
• has a tag called "Stages" that contains the current stage we're executing (in this case, "production")

Looking at the above table, we can see we would match server-1 and server-2. (You can have multiple roles in tag separated by commas.)

Now we can define the other roles:

ec2_role :app
ec2_role :db

In the "production" stage, the :app role would apply to server-2 and server-3, and the :db role would apply to server-3.

In the "staging" stage, all roles would apply only to server-4.

If you require your servers to have multiple projects deployed to them, you can simply specify all the project names you want to the server to be part of in the 'Projects' tag, separated by commas. For example, you could place a server in the testapp and myapp projects by setting the 'Projects' tag to testapp,myapp.

If your use-case requires servers to be in multiple stages, simply specify all the stages you want the server to be in 'Stages' tag, separated by commas. For example, you could place a server in the production and staging stages by setting the 'Stages' tag to production,staging.

You can pass options when defining your roles. The options are exactly the same as the options that the Capistrano native role definition takes, since they are passed straight through to Capistrano. For example:

ec2_role :app,
  user: 'user_name',
  ssh_options: {
    user: 'user_name', # overrides user setting above
    keys: %w(/home/user_name/.ssh/id_rsa),
    forward_agent: false,
    auth_methods: %w(publickey password)
    password: 'please use keys'
  }

See the example config files Capistrano builds for you in config/deploy for more details.

Note that at the moment there's no way to pass variables in from EC2 tags - but it would be trivial to add.

You can now define your tasks for these roles in exactly the same way as you would if you weren't using this gem.

By default, Cap-EC2 will attempt to communicate with the EC2 instance using the following instance interfaces in order:

1. Public DNS (:public_dns)
2. Public IP (:public_ip)
3. Private IP (:private_ip)

This can be configured using the Capistrano variable :ec2_contact_point, and supplying one of the above symbols. For example:

set :ec2_contact_point, :private_ip

This would cause Cap-EC2 to try communicating with the instance on its private IP address. If you leave this variable unset, the behaviour is as in previous Cap-EC2 instances (falling through the lookup list as specified above).

Cap-EC2 adds a few utility tasks to Capistrano for displaying information about the instances that you will be deploying to. Note that unlike Capistrano 2.x, all tasks require a stage.

This command will show you information all the instances your configuration matches for a given stage.

cap [stage] ec2:status

Example:

$ cap production ec2:status

Num  Name                          ID          Type      DNS              Zone        Roles         Stage
00:  server-1-20131030-1144-0      i-abcdefgh  m1.small  192.168.202.248  us-west-2c  banana,apple  production
01:  server-2-20131118-1839-0      i-hgfedcba  m1.small  192.168.200.60   us-west-2a  banana        production

This command will show you the server names of the instances matching the given stage:

cap [stage] ec2:server_names

Example:

$ cap production ec2:server_names
server-1-20131030-1144-0
server-2-20131118-1839-0

This command will show the instance IDs of the instances matching the given stage:

cap [stage] ec2:instance_ids

Example:

$ cap production ec2:instance_ids
i-abcdefgh
i-hgfedcba

Thanks to Rylon for maintaining Capify-EC2 and reviewing my thought processes for this project.

1. Fork it
2. Create your feature branch (git checkout -b my-new-feature)
3. Commit your changes (git commit -am 'Add some feature')
4. Push to the branch (git push origin my-new-feature)
5. Create new Pull Request