constancy

Constancy is a simple, straightforward CLI tool for synchronizing data from the filesystem to the Consul KV store and vice-versa.

Basic Usage

Run constancy check to see what differences exist, and constancy push to synchronize the changes from the filesystem to Consul.

$ constancy check
=====================================================================================
myapp-private
local:consul/private => consul:dc1:private/myapp
  Keys scanned: 37
No changes to make for this sync target.

=====================================================================================
myapp-config
local:consul/config => consul:dc1:config/myapp
  Keys scanned: 80

UPDATE config/myapp/prod/ip-allowlist.json
-------------------------------------------------------------------------------------
-["10.8.0.0/16"]
+["10.8.0.0/16","10.9.10.0/24"]
-------------------------------------------------------------------------------------

Keys to update: 1
~ config/myapp/prod/ip-allowlist.json

You can also limit your command to specific synchronization targets by using the --target flag:

$ constancy push --target myapp-config
=====================================================================================
myapp-config
local:consul/config => consul:dc1:config/myapp
  Keys scanned: 80

UPDATE config/myapp/prod/ip-allowlist.json
-------------------------------------------------------------------------------------
-["10.8.0.0/16"]
+["10.8.0.0/16","10.9.10.0/24"]
-------------------------------------------------------------------------------------

Keys to update: 1
~ config/myapp/prod/ip-allowlist.json

Do you want to push these changes?
  Enter 'yes' to continue: yes

UPDATE config/myapp/prod/ip-allowlist.json   OK

Run constancy --help for additional options and commands.

Pull Mode

Constancy can also sync from Consul to the local filesystem. This can be particularly useful for seeding a git repo with the current contents of a Consul KV database.

Run constancy check --pull to get a summary of changes, and constancy pull to actually sync the changes to the local filesystem. Additional arguments such as --target <name> work in pull mode as well.

Configuration

Constancy will automatically configure itself using the first constancy.yml file it comes across when searching backwards through the directory tree from the current working directory. So, typically you may wish to place the config file in the root of your git repository or the base directory of your config file tree.

You can also specify a config file using the --config <filename> command line argument.

Configuration file structure

The configuration file is a Hash represented in YAML format with three possible top-level keys: constancy, consul, and sync. The constancy section sets global defaults and app options. The consul section specifies the URL to the Consul REST API endpoint. And the sync section lists the directories and Consul prefixes you wish to synchronize. Only the sync section is strictly required. An example constancy.yml is below including explanatory comments:

# constancy.yml

constancy:
  # verbose - defaults to `false`
  #   Set this to `true` for more verbose output.
  verbose: false

  # chomp - defaults to `true`
  #   Automatically runs `chomp` on the strings read in from files to
  #   eliminate a single trailing newline character (commonly inserted
  #   by text editors). Set to `false` to disable this by default for
  #   all sync targets (it can be overridden on a per-target basis).
  chomp: true

  # delete - defaults to `false`
  #   Set this to `true` to make the default for all sync targets to
  #   delete any keys found in Consul that do not have a corresponding
  #   file on disk. By default, extraneous remote keys will be ignored.
  #   If `verbose` is set to `true` the extraneous keys will be named
  #   in the output.
  delete: false

  # color - defaults to `true`
  #   Set this to `false` to disable colorized output (eg when running
  #   with an automated tool).
  color: true

consul:
  # url - defaults to `http://localhost:8500`
  #   The REST API endpoint for the Consul agent.
  url: http://localhost:8500

  # datacenter - defaults to nil
  #   Set this to change the default datacenter for sync targets to
  #   something other than the datacenter of the Consul agent.
  datacenter: dc1

  # token_source - defaults to 'none'
  #   'none': expect no Consul token (although env vars will be used if they are set)
  #   'env': expect Consul token to be set in CONSUL_TOKEN or CONSUL_HTTP_TOKEN
  #   'vault': read Consul token from Vault based on settings in the 'vault' section
  #   'vault.<label>': a named Vault token source, eg `vault.us-east-1` or `vault.dev`
  #      NOTE: labels must begin with a letter and may contain only (ASCII) letters,
  #            numbers, hyphens, and underscores

# the vault section is only necessary if consul.token_source is set to 'vault'
vault:
  # url - defaults to the value of VAULT_ADDR
  #   The REST API endpoint of your Vault server
  url: https://your.vault.example

  # consul_token_path - the path to the endpoint from which to read the Consul token
  #   The Vault URI path to the Consul token - can be either the Consul
  #   dynamic backend or a KV endpoint with a static value. If the dynamic
  #   backend is used, the lease will be automatically revoked when
  #   constancy exits.
  consul_token_path: consul/creds/my-role

  # consul_token_field - name of the field in which the Consul token is stored
  #   Defaults to 'token' which is the field used by the dynamic backend
  #   but can be set to something else for static values.
  consul_token_field: token

# You can define one or more 'vault.<label>' sections to define alternative Vault
# token sources for use in individual sync targets.
vault.other:
  url: https://your.vault.example
  consul_token_path: consul/creds/my-other-role
vault.dev:
  url: https://dev.vault.example
  consul_token_path: consul/creds/my-dev-role

sync:
  # sync is an array of hashes of sync target configurations
  #   Fields:
  #     name - The arbitrary friendly name of the sync target. Only
  #       required if you wish to target specific sync targets using
  #       the `--target` CLI flag.
  #     prefix - (required) The Consul KV prefix to synchronize to.
  #     type - (default: "dir") The type of local file storage. Either
  #       'dir' to indicate a directory tree of files corresponding to
  #       Consul keys; or 'file' to indicate a single YAML file with a
  #       map of relative key paths to values.
  #     datacenter - The Consul datacenter to synchronize to. If not
  #       specified, the `datacenter` setting in the `consul` section
  #       will be used. If that is also not specified, the sync will
  #       happen with the local datacenter of the Consul agent.
  #     path - (required) The relative filesystem path to either the
  #       directory containing the files with content to synchronize
  #       to Consul if this sync target has type=dir, or the local file
  #       containing a hash of remote keys if this sync target has
  #       type=file. This path is calculated relative to the directory
  #       containing the configuration file.
  #     token_source - An alternative token source other than the
  #       default. Potential values are the same as for the
  #       consul.token_source config value: 'none', 'env', 'vault',
  #       or 'vault.<label>'.
  #     delete - Whether or not to delete remote keys that do not exist
  #       in the local filesystem. This inherits the setting from the
  #       `constancy` section, or if not specified, defaults to `false`.
  #     chomp - Whether or not to chomp a single newline character off
  #       the contents of local files before synchronizing to Consul.
  #       This inherits the setting from the `constancy` section, or if
  #       not specified, defaults to `true`.
  #     exclude - An array of Consul KV paths to exclude from the
  #       sync process. These exclusions will be noted in output if the
  #       verbose mode is in effect, otherwise they will be silently
  #       ignored. At this time there is no provision for specifying
  #       prefixes or patterns. Each key must be fully and explicitly
  #       specified.
  #     erb_enabled - Whether or not to run the local content through
  #       ERB parsing before attempting to sync to the remote. Defaults
  #       to `false`.
  - name: myapp-config
    prefix: config/myapp
    datacenter: dc1
    path: consul/config
    exclude:
      - config/myapp/beta/cowboy-yolo
      - config/myapp/prod/cowboy-yolo
  - name: myapp-private
    prefix: private/myapp
    type: dir
    datacenter: dc1
    path: consul/private
    token_source: vault.dev
    delete: true
  - name: yourapp-config
    prefix: config/yourapp
    type: file
    datacenter: dc1
    path: consul/yourapp.yml
    delete: true
    erb_enabled: true

You can run constancy config to get a summary of the defined configuration and to double-check config syntax.

File sync targets

When using type: file for a sync target (see example above), the local path should be a YAML (or JSON) file containing a hash of relative key paths to the contents of those keys. So for example, given this configuration:

sync:
  - name: config
    prefix: config/yourapp
    type: file
    datacenter: dc1
    path: yourapp.yml

If the file yourapp.yml has the following content:

---
prod/dbname: yourapp
prod/message: |
  Hello, world. This is a multiline message.
  Thanks.
prod/app/config.json: |
  {
    "port": 8080,
    "enabled": true
  }

Then constancy push will attempt to create and/or update the following keys with the corresponding content from yourapp.yml:

Key	Value
`config/yourapp/prod/dbname`	`yourapp`
`config/yourapp/prod/message`	`Hello, world. This is a multiline message.\nThanks.`
`config/yourapp/prod/app/config.json`	`{\n "port": 8080,\n "enabled": true\n}`

In addition to specifying the entire relative path in each key, you may also reference paths via your file's YAML structure directly. For example:

---
prod:
  redis:
    port: 6380
    host: redis.example.com

When pushed, this document will create and/or update the following keys:

Key	Value
`config/yourapp/prod/redis/port`	`6380`
`config/yourapp/prod/redis/host`	`redis.example.com`

You may mix and match relative paths and document hierarchy to build paths as you would like. And you may also use the special key _ to embed a value for a particular prefix while also nesting values underneath it. For example, given this local file target content:

---
prod/postgres:
  host: db.myproject.example.com
  port: 10001

prod:
  redis:
    _: Embedded Value
    port: 6380

prod/redis/host: cache.myproject.example.com

This file target content would correspond to the following values, when pushed:

Key	Value
`config/yourapp/prod/postgres/host`	`db.myproject.example.com`
`config/yourapp/prod/postgres/port`	`10001`
`config/yourapp/prod/redis`	`Embedded Value`
`config/yourapp/prod/redis/port`	`6380`
`config/yourapp/prod/redis/host`	`cache.myproject.example.com`

A constancy pull operation against a file type target will work in reverse, and pull values from any keys under config/yourapp/ into the file yourapp.yml, overwriting whatever values are there.

NOTE: Values in local file targets are converted to strings before comparing with or uploading to the remote Consul server. However, because YAML parsing converts some values (such as yes or no) to boolean types, the effective value of a key with a value of a bare yes will be true when converted to a string. If you need the actual values yes or no, use quotes around the value to force the YAML parser to interpret it as a string.

IMPORTANT NOTES ABOUT PULL MODE WITH FILE TARGETS

Against a file target, the structure of the local file can vary in a number of ways while still producing the same remote structure. Thus, in pull mode, Constancy must necessarily choose one particular rendering format, and will not be able to retain the exact structure of the local file if you alternate push and pull operations.

Specifically, the following caveats are important to note, when pulling a target to a local file:

The local file will be written out as YAML, even if it was originally provided locally as a JSON file, and even if the extension is .json.
Any existing comments in the local file will be lost.
The document structure will be that of a flat hash will fully-specified relative paths as the keys.

Future versions of Constancy may provide options to modify the behavior for pull operations on a per-target basis. Pull requests are always welcome.

Dynamic configuration

The configuration file will be rendered through ERB before being parsed as YAML. This can be useful for avoiding repetitive configuration across multiple prefixes or datacenters, eg:

sync:
<% %w( dc1 dc2 dc3 ).each do |dc| %>
  - name: <%= dc %>:myapp-private
    prefix: private/myapp
    datacenter: <%= dc %>
    path: consul/<%= dc %>/private
    delete: true
<% end %>

It's a good idea to sanity-check your ERB by running constancy config after making any changes.

Dynamic content

You can also choose to enable ERB parsing for local content as well, by setting erb_enabled: true on any sync targets you wish to populate in this way.

Environment configuration

Constancy may be partially configured using environment variables:

CONSTANCY_VERBOSE - set this variable to any value to enable verbose mode
CONSUL_HTTP_TOKEN or CONSUL_TOKEN - use one of these variables (priority is given to CONSUL_HTTP_TOKEN) to set an explicit Consul token to use when interacting with the API. Otherwise, by default the agent's acl_token setting is used implicitly.
VAULT_ADDR and VAULT_TOKEN - if consul.token_source is set to vault or vault.<label>, these variables are used to authenticate to Vault. If VAULT_TOKEN is not set, Constancy will attempt to read a token from ~/.vault-token. If the url field is set, it will take priority over the VAULT_ADDR environment variable, but one or the other must be set.

Roadmap

Constancy is relatively new software. There's more to be done. Some ideas, which may or may not ever be implemented:

Using CAS to verify the key has not changed in the interim before updating/deleting
Options for file target pull-mode rendering
Automation support for running non-interactively
Pattern- and prefix-based exclusions
Logging of changes to files, syslog, other services
Other commands to assist in managing Consul KV sets
Git awareness (branches, commit state, etc)
Automated tests
Submitting changes in batches using transactions

Contributing

I'm happy to accept suggestions, bug reports, and pull requests through Github.

License

This software is public domain. No rights are reserved. See LICENSE for more information.

constancy

Development

Runtime

constancy

Basic Usage

Pull Mode

Configuration

Configuration file structure

File sync targets

IMPORTANT NOTES ABOUT PULL MODE WITH FILE TARGETS

Dynamic configuration

Dynamic content

Environment configuration

Roadmap

Contributing

License