Glueby

Glueby is a smart contract library on the Tapyrus blockchain. This is designed as you can use without any deep blockchain understanding.

Glueby has below features.

1. Wallet You can manage wallets for application users. This wallet feature is a foundation of Contracts below to specify tx sender and so on.
   You can choose two sorts of wallet implementation :activerecord and :core. :activerecord is implemented using ActiveRecord on RDB. :core uses the wallet that bundled with Tapyrus Core.

2. Contracts
   You can use some smart contracts easily

   • Timestamp: Record any data as a timestamp to a tapyrus blockchain.
   • Payment: Transfer TPC.
   • Token: Issue, transfer and burn colored coin.

3. Sync blocks with your application
   You can use BlockSyncer when you need to synchronize the state of an application with the state of a blockchain.
   See more details at BlockSyncer.

4. Take over tx sender's fees
   FeeProvider module can bear payments of sender's fees. You should provide funds for fees to FeeProvider before use.
   See how to set up at Use fee provider mode

5. Utxo Provider The UtxoProvider allows users to create a variety of transactions without having to manage the TPCs they hold in their wallets. See more details at Use utxo provider

Add this line to your application's Gemfile:

gem 'glueby'

And then execute:

$ bundle install

Or install it yourself as:

$ gem install glueby

1. Add this line to your application's Gemfile

   gem 'glueby'

   and then execute

    $ bundle install
   

2. Run installation rake task

    $ rails glueby:contract:install
   

3. Run Tapyrus Core as dev mode

   We recommend to run as a Docker container. Docker image is here.

   • tapyus/tapyrusd

   Starts tapryusd container

    $ docker run -d --name 'tapyrus_node_dev' -p 12381:12381 -e GENESIS_BLOCK_WITH_SIG='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' tapyrus/tapyrusd:v0.5.2
   

4. Modify the glueby configuration

   # Use tapyrus dev network
   Tapyrus.chain_params = :dev
   Glueby.configure do |config|
     config.wallet_adapter = :activerecord
     # Modify rpc connection info in config/initializers/glueby.rb that is created in step 3.
     config.rpc_config = { schema: 'http', host: '127.0.0.1', port: 12381, user: 'rpcuser', password: 'rpcpassword' }
   end

5. Generate db migration files for wallet feature

   These are essential if you use config.wallet_adapter = :activerecord configuration.

    $ rails g glueby:contract:block_syncer
    $ rails g glueby:contract:wallet_adapter
   

   If you want to use token or timestamp, you need to do below generators.

    $ rails g glueby:contract:token
    $ rails g glueby:contract:timestamp
   

   Then, run the migrations.

    $ rails db:migrate
   

To use contracts, wallets need to have TPC and it can be provided from coinbase tx.

1. Create a wallet and get receive address

   wallet = Glueby::Wallet.create
   wallet.balances # => {}
   address = wallet.internal_wallet.receive_address
   puts address

2. Generate a block

   Set an address you got in previous step to [Your address]

    $ docker exec tapyrus_node_dev tapyrus-cli -conf=/etc/tapyrus/tapyrus.conf generatetoaddress 1 "[Your address]" "cUJN5RVzYWFoeY8rUztd47jzXCu1p57Ay8V7pqCzsBD3PEXN7Dd4"
   

3. Sync blocks if you use :activerecord wallet adapter

   You don't need to do this if you are using :core wallet_adapter.

    $ rails glueby:contract:block_syncer:start
   

   Here the wallet created in step 1 have 50 TPC and you can see like this:

   wallet.balances # =>  {""=>5000000000}

   TPC amount is shown as tapyrus unit. 1 TPC = 100000000 tapyrus.

Glurby.configure do |config|
  config.wallet_adapter = :activerecord
  config.rpc_config = { schema: 'http', host: '127.0.0.1', port: 12381, user: 'user', password: 'pass' }
end

wallet = Glueby::Wallet.create
timestamp = Glueby::Contract::Timestamp.new(wallet: wallet, content: "\x01\x02\x03")
timestamp.save!
# "a01eace94ce6cdc30f389609de8a7584a4e208ee82fec33a2f5875b7cee47097"

We can see the timestamp transaction using getrawblockchain command

> tapyrus-cli -rpcport=12381 -rpcuser=user -rpcpassword=pass getrawtransaction a01eace94ce6cdc30f389609de8a7584a4e208ee82fec33a2f5875b7cee47097 1

{
  "txid": "a01eace94ce6cdc30f389609de8a7584a4e208ee82fec33a2f5875b7cee47097",
  "hash": "a559a84d94cff58619bb735862eb93ff7a3b8fe122a8f2f4c10b7814fb15459a",
  "features": 1,
  "size": 234,
  "vsize": 234,
  "weight": 936,
  "locktime": 0,
  "vin": [
    {
      "txid": "12658e0289da70d43ae3777a174ac8c40f89cbe6564ed6606f197764b3556200",
      "vout": 0,
      "scriptSig": {
        "asm": "3044022067285c57a57fc0d7f64576abbec65639b0f4a8c31b5605eefe881edccb97c62402201ddec93c0c9bf3bb5707757e97e7fa6566c0183b41537e4f9ec46dcfe401864d[ALL] 03b8ad9e3271a20d5eb2b622e455fcffa5c9c90e38b192772b2e1b58f6b442e78d",
        "hex": "473044022067285c57a57fc0d7f64576abbec65639b0f4a8c31b5605eefe881edccb97c62402201ddec93c0c9bf3bb5707757e97e7fa6566c0183b41537e4f9ec46dcfe401864d012103b8ad9e3271a20d5eb2b622e455fcffa5c9c90e38b192772b2e1b58f6b442e78d"
      },
      "sequence": 4294967295
    }
  ],
  "vout": [
    {
      "value": 0.00000000,
      "n": 0,
      "scriptPubKey": {
        "asm": "OP_RETURN 039058c6f2c0cb492c533b0a4d14ef77cc0f78abccced5287d84a1a2011cfb81",
        "hex": "6a20039058c6f2c0cb492c533b0a4d14ef77cc0f78abccced5287d84a1a2011cfb81",
        "type": "nulldata"
      }
    },
    {
      "value": 49.99990000,
      "n": 1,
      "scriptPubKey": {
        "asm": "OP_DUP OP_HASH160 3c0422f624f2503193c7413eff32839b9e151b54 OP_EQUALVERIFY OP_CHECKSIG",
        "hex": "76a9143c0422f624f2503193c7413eff32839b9e151b5488ac",
        "reqSigs": 1,
        "type": "pubkeyhash",
        "addresses": [
          "16ULVva73ZhQiZu9o3njXc3TZ3aSog7FQQ"
        ]
      }
    }
  ],
  "hex": "0100000001006255b36477196f60d64e56e6cb890fc4c84a177a77e33ad470da89028e6512000000006a473044022067285c57a57fc0d7f64576abbec65639b0f4a8c31b5605eefe881edccb97c62402201ddec93c0c9bf3bb5707757e97e7fa6566c0183b41537e4f9ec46dcfe401864d012103b8ad9e3271a20d5eb2b622e455fcffa5c9c90e38b192772b2e1b58f6b442e78dffffffff020000000000000000226a20039058c6f2c0cb492c533b0a4d14ef77cc0f78abccced5287d84a1a2011cfb81f0ca052a010000001976a9143c0422f624f2503193c7413eff32839b9e151b5488ac00000000",
  "blockhash": "d33efc626114f89445d12c27f453c209382a3cb49de132bf978449093f2d2dbb",
  "confirmations": 3,
  "time": 1590822803,
  "blocktime": 1590822803
}

Glueby supports ruby on rails integration.

To use in rails, Add dependency to Gemfile.

Then invoke install task.

bin/rails glueby:contract:install

Install task creates a file glueby.rb in config/initializers directory like this.

# Edit configuration for connection to tapyrus core
Glueby.configure do |config|
  config.wallet_adapter = :activerecord
  config.rpc_config = { schema: 'http', host: '127.0.0.1', port: 12381, user: 'user', password: 'pass' }
end

# Uncomment next line when using timestamp feature
# Glueby::BlockSyncer.register_syncer(Glueby::Contract::Timestamp::Syncer)

If you use timestamp feature, use glueby:contract:timestamp generator.

bin/rails g glueby:contract:timestamp
    create  db/migrate/20200613065511_create_timestamp.rb
bin/rails db:migrate
== 20200613065511 CreateTimestamp: migrating ==================================
-- create_table(:timestamps)
   -> 0.0023s
== 20200613065511 CreateTimestamp: migrated (0.0024s) =========================

Now, Glueby::Contract::AR::Timestamp model is available

irb(main):001:0> wallet = Glueby::Wallet.create
=> #<Glueby::Wallet:0x00007fe8333f7d98 @internal_wallet=#<Glueby::Internal::Wallet:0x00007fe8333f7dc0 @id="70a58204a7f4cb10d973b762f17fdb4b">>
irb(main):003:0> t = Glueby::Contract::AR::Timestamp.new(wallet_id: wallet.id, content:"\x01010101", prefix: "app")
   (0.5ms)  SELECT sqlite_version(*)
=> #<Glueby::Contract::AR::Timestamp id: nil, txid: nil, status: "init", content_hash: "9ccc644b03a88358a754962903a659a2d338767ee61674dde5...", prefix: "app", wallet_id: "70a58204a7f4cb10d973b762f17fdb4b">
irb(main):004:0> t.save
   (0.1ms)  begin transaction
  Glueby::Contract::AR::Timestamp Create (0.4ms)  INSERT INTO "timestamps" ("status", "content_hash", "prefix", "wallet_id") VALUES (?, ?, ?, ?)  [["status", 0], ["content_hash", "9ccc644b03a88358a754962903a659a2d338767ee61674dde5434702a6256e6d"], ["prefix", "app"], ["wallet_id", "70a58204a7f4cb10d973b762f17fdb4b"]]
   (2.1ms)  commit transaction
=> true

After create timestamp model, run glueby:contract:timestamp:create task to broadcast the transaction to the Tapyrus Core Network and update status(init -> unconfirmed).

bin/rails glueby:contract:timestamp:create
broadcasted (id=1, txid=8d602ca8ebdd50fa70b5ee6bc6351965b614d0a4843adacf9f43fedd7112fbf4)

Run glueby:block_syncer:start task to confirm the transaction and update status(unconfirmed -> confirmded).

bin/rails glueby:block_syncer:start

Glueby contracts have two different way of fee provisions.

1. :sender_pays_itself
2. :fee_provider_bears

The first one: :sender_pays_itself, is the default behavior. In the second Fee Provider mode, the Fee Provider module pays a fee instead of the transaction's sender.

• Fee Provider pays fixed amount fee, and it is configurable.
• Fee Provider needs to have enough funds into their wallet.
• Fee Provider is managed to keep some number of UTXOs that have fixed fee value by rake tasks.

1. Set like below

Glueby.configure do |config|
  # Use FeeProvider to supply inputs for fees on each transaction that is created on Glueby.
  config.fee_provider_bears!
  config.fee_provider_config = {
    # The fee that Fee Provider pays on each transaction.
    fixed_fee: 1000,
    # Fee Provider tries to keep the number of utxo in utxo pool as this size using `glueby:fee_provider:manage_utxo_pool` rake task
    # This size should not be greater than 2000.
    utxo_pool_size: 20 
  }
end

2. Deposit TPC into Fee Provider's wallet

Get an address from the wallet.

$ bundle exec rake glueby:fee_provider:address
mqYTLdLCUCCZkTkcpbVx1GqpvV1gK4euRD

Send TPC to the address.

If you use Glueby::Contract::Payment to the sending, you can do like this:

Glueby::Contract::Payment.transfer(sender: sender, receiver_address: 'mqYTLdLCUCCZkTkcpbVx1GqpvV1gK4euRD', amount: 1_000_000)

3. Manage UTXO pool

The Fee Provider's wallet has to keep some UTXOs with fixed_fee amount for paying fees using manage_utxo_pool rake task below. This rake task tries to split UTOXs up to utxo_pool_size. If the pool has more than utxo_pool_size UTXOs, it does nothing.

$ bundle exec rake glueby:fee_provider:manage_utxo_pool
Status: Ready
TPC amount: 999_000
UTXO pool size: 20

Configuration:
  fixed_fee = 1_000
  utxo_pool_size = 20

This shows that the UTXO pool has 20 UTXOs with fixed_fee amount for paying fees and has other UTXOs that never use for paying fees. The sum of all the UTXOs that includes both kinds of UTXO is 999_000 tapyrus.

If the wallet doesn't have enough amount, the rake task shows an error like:

$ bundle exec rake glueby:fee_provider:manage_utxo_pool
Status: Insufficient Amount
TPC amount: 15_000
UTXO pool size: 15

1. Please replenishment TPC which is for paying fee to FeeProvider. 
   FeeProvider needs 21000 tapyrus at least for paying 20 transaction fees. 
   FeeProvider wallet's address is '1DBgMCNBdjQ1Ntz1vpwx2HMYJmc9kw88iT'
2. Then create UTXOs for paying in UTXO pool with 'rake glueby:fee_provider:manage_utxo_pool'

Configuration:
  fixed_fee = 1_000
  utxo_pool_size = 20

If you want to get the status information, you can use the status task.

$ bundle exec rake glueby:fee_provider:status
Status: Ready
TPC amount: 999_000
UTXO pool size: 20

Configuration:
  fixed_fee = 1_000
  utxo_pool_size = 20

UtxoProvider will pay TPC on behalf of the user.

TPCs are required to create transactions in many cases where Glueby is used, such as issuing tokens or recording timestamps. However, on the other hand, each user may not want to fund or manage TPCs.

The UtxoProvider allows users to create a variety of transactions without having to manage the TPCs they hold in their wallets.

1. Configure using Glueby.configure

Glueby.configure do |config|
  # using Utxo Provider
  config.enable_utxo_provider!

  # If not using Utxo Provider and each wallet manages TPCs by itself (Default behavior)
  # config.disable_utxo_provider!

  config.utxo_provider_config = {
    # The amount that each utxo in utxo pool posses.
    default_value: 1_000,
    # The number of utxos in utxo pool. This size should not be greater than 2000.
    utxo_pool_size: 20
  }
end

2. Deposit TPC into Utxo Provider's wallet

Get an address from the wallet, and send enough TPCs to the address.

$ bundle exec rake glueby:utxo_provider:address
mqYTLdLCUCCZkTkcpbVx1GqpvV1gK4euRD

3. Manage UTXO pool

Run the rake task glueby:utxo_provider:manage_utxo_pool This rake task tries to split UTOXs up to utxo_pool_size. If the pool has more than utxo_pool_size UTXOs, it does nothing

$ bundle exec rake glueby:utxo_provider:manage_utxo_pool

Status: Ready
TPC amount: 4_999_990_000
UTXO pool size: 20

Configuration:
  default_value = 1_000
  utxo_pool_size = 20

If you want to get the status information, you can use the status task.

$ bundle exec rake glueby:utxo_provider:status
Status: Ready  q
TPC amount: 4_999_990_000
UTXO pool size: 20

Configuration:
  default_value = 1_000
  utxo_pool_size = 20

The architecture of Glueby accepts any fee estimation strategies for paying transactions fee. However, we officially support only one strategy: the fixed fee strategy to contract transactions. It just returns a fixed fee value without any estimation. Here provides a configuration to modify the default fixed fee value it returns like this:

Glueby.configure do |config|
   config.default_fixed_fee = 10_000
end

Glueby provide automate fee estimator Glueby::Contract::FeeEstimator::Auto that calculate minimum fee possible to broadcast from fee rate and tx size. This method can be used in UTXO provider's management task so far. In other place where creates txs is not tested with this yet.

Here provides a configuration to modify the default fee rate it returns like this:

Glueby.configure do |config|
   config.default_fee_rate = 1_000
end

Glueby has base error classes like Glueby::Error and Glueby::ArgumentError. Glueby::Error is the base class for the all errors that are raises in the glueby. Glueby::ArgumentError is the error class for argument errors in public contracts. This notifies the arguments is something wrong to glueby library user-side.

After checking out the repo, run bin/setup to install dependencies. Then, run rake spec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.

Bug reports and pull requests are welcome on GitHub at https://github.com/[USERNAME]/glueby. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the code of conduct.

The gem is available as open source under the terms of the MIT License.

Everyone interacting in the Glueby project's codebases, issue trackers, chat rooms and mailing lists is expected to follow the code of conduct.