RBHive - A Ruby Thrift client for Apache Hive

This is u2i fork of rbhive.

gem 'rbhive-u2i', require: 'rbhive'

RBHive is a simple Ruby gem to communicate with the Apache Hive Thrift servers.

It supports:

• Hiveserver (the original Thrift service shipped with Hive since early releases)
• Hiveserver2 (the new, concurrent Thrift service shipped with Hive releases since 0.10)
• Any other 100% Hive-compatible Thrift service (e.g. Sharkserver)

It is capable of using the following Thrift transports:

• BufferedTransport (the default)
• SaslClientTransport (SASL-enabled transport)
• HTTPClientTransport (tunnels Thrift over HTTP)

As of version 1.0, it supports asynchronous execution of queries. This allows you to submit a query, disconnect, then reconnect later to check the status and retrieve the results. This frees systems of the need to keep a persistent TCP connection.

Hiveserver (the original Thrift interface) only supports a single client at a time. RBHive implements this with the RBHive::Connection class. It only supports a single transport, BufferedTransport.

Hiveserver2 (the new Thrift interface) can support many concurrent client connections. It is shipped with Hive 0.10 and later. In Hive 0.10, only BufferedTranport and SaslClientTransport are supported; starting with Hive 0.12, HTTPClientTransport is also supported.

Each of the versions after Hive 0.10 has a slightly different Thrift interface; when connecting, you must specify the Hive version or you may get an exception.

Hiveserver2 supports (in versions later than 0.12) asynchronous query execution. This works by submitting a query and retrieving a handle to the execution process; you can then reconnect at a later time and retrieve the results using this handle. Using the asynchronous methods has some caveats - please read the Asynchronous Execution section of the documentation thoroughly before using them.

RBHive implements this client with the RBHive::TCLIConnection class.

We had to set the following in hive-site.xml to get the BufferedTransport Thrift service to work with RBHive:

<property>
  <name>hive.server2.enable.doAs</name>
  <value>false</value>
</property>

Otherwise you'll get this nasty-looking exception in the logs:

ERROR server.TThreadPoolServer: Error occurred during processing of message.
java.lang.ClassCastException: org.apache.thrift.transport.TSocket cannot be cast to org.apache.thrift.transport.TSaslServerTransport
  at org.apache.hive.service.auth.TUGIContainingProcessor.process(TUGIContainingProcessor.java:35)
  at org.apache.thrift.server.TThreadPoolServer$WorkerProcess.run(TThreadPoolServer.java:206)
  at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:895)
  at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:918)
  at java.lang.Thread.run(Thread.java:662) 

Consult the documentation for the service, as this will vary depending on the service you're using.

Since Hiveserver has no options, connection code is very simple:

RBHive.connect('hive.server.address', 10_000) do |connection|
  connection.fetch 'SELECT city, country FROM cities'
end 
➔ [{:city => "London", :country => "UK"}, {:city => "Mumbai", :country => "India"}, {:city => "New York", :country => "USA"}]

Hiveserver2 has several options with how it is run. The connection code takes a hash with these possible parameters:

• :transport - one of :buffered (BufferedTransport), :http (HTTPClientTransport), or :sasl (SaslClientTransport)
• :hive_version - the number after the period in the Hive version; e.g. 10, 11, 12, 13 or one of a set of symbols; see Hiveserver2 protocol versions below for details
• :timeout - if using BufferedTransport or SaslClientTransport, this is how long the timeout on the socket will be
• :sasl_params - if using SaslClientTransport, this is a hash of parameters to set up the SASL connection

If you pass either an empty hash or nil in place of the options (or do not supply them), the connection is attempted with the Hive version set to 0.10, using :buffered as the transport, and a timeout of 1800 seconds.

Connecting with the defaults:

RBHive.tcli_connect('hive.server.address', 10_000) do |connection|
  connection.fetch('SHOW TABLES')
end

Connecting with a Logger:

RBHive.tcli_connect('hive.server.address', 10_000, { logger: Logger.new(STDOUT) }) do |connection|
  connection.fetch('SHOW TABLES')
end

Connecting with a specific Hive version (0.12 in this case):

RBHive.tcli_connect('hive.server.address', 10_000, { hive_version: 12 }) do |connection|
  connection.fetch('SHOW TABLES')
end

Connecting with a specific Hive version (0.12) and using the :http transport:

RBHive.tcli_connect('hive.server.address', 10_000, { hive_version: 12, transport: :http }) do |connection|
  connection.fetch('SHOW TABLES')
end

We have not tested the SASL connection, as we don't run SASL; pull requests and testing are welcomed.

Since the introduction of Hiveserver2 in Hive 0.10, there have been a number of revisions to the Thrift protocol it uses.

The following table lists the available values you can supply to the :hive_version parameter when making a connection to Hiveserver2.

In addition, you can explicitly set the Thrift protocol version according to this table:

In versions of Hive later than 0.12, the Thrift server supports asynchronous execution.

The high-level view of using this feature is as follows:

1. Submit your query using async_execute(query). This function returns a hash with the following keys: :guid, :secret, and :session. You don't need to care about the internals of this hash - all methods that interact with an async query require this hash, and you can just store it and hand it to the methods.
2. To check the state of the query, call async_state(handles), where handles is the handles hash given to you when you called async_execute(query).
3. To retrieve results, call either async_fetch(handles) or async_fetch_in_batch(handles), which work like the non async methods.
4. When you're done with the query, call async_close_session(handles).

When you call async_close_session(handles), all async handles created during this session are closed.

If you do not close the sessions you create, you will leak memory in the Hiveserver2 process. Be very careful to close your sessions!

This method submits a query for async execution. The hash you get back is used in the other async methods, and will look like this:

{
  :guid => (binary string),
  :secret => (binary string),
  :session => (binary string)
}

The Thrift protocol specifies the strings as "binary" - which means they have no encoding. Be extremely careful when manipulating or storing these values, as they can quite easily get converted to UTF-8 strings, which will make them invalid when trying to retrieve async data.

handles is the hash returned by async_execute(query). The state will be a symbol with one of the following values and meanings:

There are also the utility methods async_is_complete?(handles), async_is_running?(handles), async_is_failed?(handles) and async_is_cancelled?(handles).

Calling this method will cancel the query in execution.

These methods let you fetch the results of the async query, if they are complete. If you call these methods on an incomplete query, they will raise an exception. They work in exactly the same way as the normal synchronous methods.

RBHive.connect('hive.server.address', 10_000) do |connection|
  connection.fetch 'SELECT city, country FROM cities'
end 
➔ [{:city => "London", :country => "UK"}, {:city => "Mumbai", :country => "India"}, {:city => "New York", :country => "USA"}]

RBHive.tcli_connect('hive.server.address', 10_000) do |connection|
  connection.fetch 'SELECT city, country FROM cities'
end 
➔ [{:city => "London", :country => "UK"}, {:city => "Mumbai", :country => "India"}, {:city => "New York", :country => "USA"}]

RBHive.connect('hive.server.address') do |connection|
  connection.execute 'DROP TABLE cities'
end
➔ nil

RBHive.tcli_connect('hive.server.address') do |connection|
  connection.execute 'DROP TABLE cities'
end
➔ nil

table = TableSchema.new('person', 'List of people that owe me money') do
  column 'name', :string, 'Full name of debtor'
  column 'address', :string, 'Address of debtor'
  column 'amount', :float, 'The amount of money borrowed'

  partition 'dated', :string, 'The date money was given'
  partition 'country', :string, 'The country the person resides in'
end

Then for Hiveserver:

RBHive.connect('hive.server.address', 10_000) do |connection|
  connection.create_table(table)
end  

Or Hiveserver2:

RBHive.tcli_connect('hive.server.address', 10_000) do |connection|
  connection.create_table(table)
end  

table = TableSchema.new('person', 'List of people that owe me money') do
  column 'name', :string, 'Full name of debtor'
  column 'address', :string, 'Address of debtor'
  column 'amount', :float, 'The amount of money borrowed'
  column 'new_amount', :float, 'The new amount this person somehow convinced me to give them'

  partition 'dated', :string, 'The date money was given'
  partition 'country', :string, 'The country the person resides in'
end

Then for Hiveserver:

RBHive.connect('hive.server.address') do |connection|
  connection.replace_columns(table)
end  

Or Hiveserver2:

RBHive.tcli_connect('hive.server.address') do |connection|
  connection.replace_columns(table)
end  

You can set various properties for Hive tasks, some of which change how they run. Consult the Apache Hive documentation and Hadoop's documentation for the various properties that can be set. For example, you can set the map-reduce job's priority with the following:

connection.set("mapred.job.priority", "VERY_HIGH")

RBHive.connect('hive.hadoop.forward.co.uk', 10_000) {|connection| 
  result = connection.fetch("describe some_table")
  puts result.column_names.inspect
  puts result.first.inspect
}

RBHive.tcli_connect('hive.hadoop.forward.co.uk', 10_000) {|connection| 
  result = connection.fetch("describe some_table")
  puts result.column_names.inspect
  puts result.first.inspect
}

We use RBHive against Hive 0.10, 0.11 and 0.12, and have tested the BufferedTransport and HTTPClientTransport. We use it against both Hiveserver and Hiveserver2 with success.

We have not tested the SaslClientTransport, and would welcome reports on whether it works correctly.

We welcome contributions, issues and pull requests. If there's a feature missing in RBHive that you need, or you think you've found a bug, please do not hesitate to create an issue.

1. Fork it
2. Create your feature branch (git checkout -b my-new-feature)
3. Commit your changes (git commit -am 'Add some feature')
4. Push to the branch (git push origin my-new-feature)
5. Create new Pull Request