Stoor provides a Gollum (wiki) server with a few other bells and whistles, such as authentication against GitHub OAuth.

In our environment, the contents of our wiki are confidential and should not be pushed up to GitHub. We keep the wiki on a local machine (behind a firewall), and put the wiki contents into a directory that is sync'd to box.com. (box.com is useful for confidential data, because they will sign a HIPAA BAA.) Meanwhile, we'd like to authorize access by some means: we like GitHub Oauth, so that we can constrain access by GitHub Organization Team membership.

• Ruby 1.9.2 or greater. Unfortunately, Stoor will no longer work on Ruby 1.8.7, because gollum-lib now wants Nokogiri 1.6.0 (see?), and 1.8.7 isn't supported. That's too bad, because it was nice that this would work on the older system Ruby on a Mac.
• Persistent access to the filesystem (i.e., won't work on Heroku).
• An operating system other than Windows (because Gollum doesn't work on Windows, because grit doesn't work on Windows . . .).

gem install stoor

(On occasion I have had to rbenv rehash.)

(Relax, the client id and secret below are fake.)

To get started, change directory to your git repo where your wiki content lives, and type the stoor command:

cd wiki
stoor

This will run your gollum wiki on port 3000, though it will decorate the footer with a message saying who the committer is. When not authenticating against GitHub, the default options for the wiki repo is used (i.e., the values for the GitHub commit will be what you see in git config -l).

The stoor command is a thin wrapper around the thin web server, and takes all thin options (-p <port>, etc.).

If you don't have a repo yet for your wiki . . .

mkdir mywiki
cd mywiki
git init .
stoor

Stoor is configured via environment variables of the form <name>_<some token>. <name> is taken from the name of the directory in which the application resides. If you clone the app or use it as a Gem, it will be: STOOR If you clone into a directory with a different name (e.g., stoor2) it will be: STOOR2. This facilitates running two instances of Stoor in the same process (see below regarding Apache).

STOOR_WIKI_PATH=/Users/admin/wiki

The STOOR_WIKI_PATH environment variable provides for locating the wiki contents in a differet repo from the Stoor application. It is strongly advised that you do this so that you can keep your wiki code and wiki content separate.

Require authorization via GitHub to the GitHub application with the given client id and secret

STOOR_GITHUB_CLIENT_ID=780ec06a331b4f61a345
STOOR_GITHUB_CLIENT_SECRET=f1e5439aff166c34f707747120acbf66ef233fc2

Access to the wiki will first run through GitHub OAuth against the app specified by the id and secret. For information on setting up an application in GitHub and obtaining its id and secret, see https://github.com/settings/applications/new. If you are running Stoor on localhost with the stoor command, the typical settings would be:

NOTE: No matter what your domain and port, the callback path must be /auth/github/callback.

NOTE: See also STOOR_DOMAIN below: The domain specified for the cookie should match the domain in your GitHub application settings.

If there is more than one email associated with the GitHub user, prefer the one from the specified domain (otherwise the first email will be used)

STOOR_GITHUB_EMAIL_DOMAIN=7fff.com

STOOR_GITHUB_TEAM_ID=11155

If the user is not a member of the specified team, they aren't allowed access.

To determine a team id, do the following:

1. Install curl
2. Go to Github / Settings / Personal access tokens (https://github.com/settings/tokens)
3. Generate a new token by clicking "Generate new token"
4. Provide a name and check at least "read:org"; click "Generate token"
5. Make a note of it
6. From the console, curl -H "Authorization: token YOURTOKEN" https://api.github.com/orgs/IoraHealth/teams
7. Find the id in the list

STOOR_DOMAIN=wiki.local    # default: localhost

STOOR_SECRET="honi soit qui mal y pense"    # default: stoor

STOOR_EXPIRE_AFTER=600    # In seconds; default: 3600

STOOR_WIDE=y              # Main wiki content will take 90% of browser width; widens tables as well

STOOR_READONLY=y          # Create, New, Delete buttons and links hidden;
                          # /create/*, /delete/*, POST, and PUT requests redirected to "sorry" page

I like having my own personal wiki. Since Apache is ubiquitous on Macs, I run the Wiki with configuration in /etc/apache2/httpd.conf, and some Ruby provided by rbenv, and Passenger.

I create an extra name for 127.0.0.1 in /etc/hosts such as wiki.local. Then:

  gem install passenger
  passenger-install-apache2-module

Then in /etc/apache2/httpd.conf:

LoadModule passenger_module /opt/boxen/rbenv/versions/1.9.2-p320/lib/ruby/gems/1.9.1/gems/passenger-4.0.19/buildout/apache2/mod_passenger.so
PassengerRoot /opt/boxen/rbenv/versions/1.9.2-p320/lib/ruby/gems/1.9.1/gems/passenger-4.0.19
PassengerDefaultRuby /opt/boxen/rbenv/versions/1.9.2-p320/bin/ruby

NameVirtualHost *:80

<VirtualHost *:80>
  SetEnv STOOR_GITHUB_CLIENT_ID 780ec06a331b4f61a345
  SetEnv STOOR_GITHUB_CLIENT_SECRET f1e5439aff166c34f707747120acbf66ef233fc2
  SetEnv STOOR_GITHUB_EMAIL_DOMAIN 7fff.com
  SetEnv STOOR_DOMAIN wiki.local
  SetEnv STOOR_EXPIRE_AFTER 60
  SetEnv STOOR_WIKI_PATH /Users/jgn/Dropbox/wiki
  ServerName wiki.local
  DocumentRoot "/opt/boxen/rbenv/versions/1.9.2-p320/lib/ruby/gems/1.9.1/gems/stoor-0.1.4/public"
  <Directory "/opt/boxen/rbenv/versions/1.9.2-p320/lib/ruby/gems/1.9.1/gems/stoor-0.1.4/public">
    Allow from all
    Options -MultiViews
  </Directory>
</VirtualHost>

and finally:

sudo apachectl -k restart

Now browse your wiki at http://wiki.local

You may want to run two instances of Stoor in the same Apache. For instance, they might both use the same Wiki path, but one is set to be read-only, while the other allows edits.

To do this, don't set the DocumentRoot to the Gem directory. Intead, clone the repo twice, once into a directory such as stoor1 the other into stoor2. Then configure the two VirtualHosts with environment variables based on each directory. Something like this:

<VirtualHost *:80>
  SetEnv STOOR1_GITHUB_CLIENT_ID 780ec06a331b4f61a345
  SetEnv STOOR1_GITHUB_CLIENT_SECRET f1e5439aff166c34f707747120acbf66ef233fc2
  SetEnv STOOR1_GITHUB_EMAIL_DOMAIN 7fff.com
  SetEnv STOOR1_DOMAIN wiki.local
  SetEnv STOOR1_EXPIRE_AFTER 60
  SetEnv STOOR1_WIKI_PATH /Users/jgn/Dropbox/wiki
  ServerName wiki.local
  DocumentRoot "/Users/jgn/src/stoor1"
  <Directory "/Users/jgn/src/stoor1">
    Allow from all
    Options -MultiViews
  </Directory>
</VirtualHost>

<VirtualHost *:80>
  SetEnv STOOR2_GITHUB_CLIENT_ID 780ec06a331b4f61a345
  SetEnv STOOR2_GITHUB_CLIENT_SECRET f1e5439aff166c34f707747120acbf66ef233fc2
  SetEnv STOOR2_GITHUB_EMAIL_DOMAIN 7fff.com
  SetEnv STOOR2_DOMAIN wiki.local
  SetEnv STOOR2_EXPIRE_AFTER 60
  SetEnv STOOR2_WIKI_PATH /Users/jgn/Dropbox/wiki
  SetEnv STOOR2_READONLY y
  ServerName wiki-readonly.local
  DocumentRoot "/Users/jgn/src/stoor2"
  <Directory "/Users/jgn/src/stoor2">
    Allow from all
    Options -MultiViews
  </Directory>
</VirtualHost>

A bit of advice: Use the MediaWiki format for links internal to your wiki. This style is recommended by GitHub (see https://help.github.com/articles/how-do-i-add-links-to-my-wiki).

For example, if you have a secondary page called foo.md, and want a link that displays "This is my foo page", write your page link like this

[[This is my foo page|foo]]

Notice that the Gollum docs say "The page file may exist anywhere in the directory structure of the repository. Gollum does a breadth first search and uses the first match that it finds" -- So keep your page names unique.

If you want to use relative links of the form [Display text](wiki/other), don't. The wikis on GitHub do some wrangling with the base path that are not compatible with local wikis managed by Gollum. If you peruse the Gollum documentation at https://github.com/gollum/gollum/wiki#page-links, you will see that they don't describe the Markdown format at all.

(Within a Rack Builder, even if you set the Gollum base_path and wrap Gollum in a map with the same base_path you will find that the displayed paths prefix URLs with an extra base_path.)

• No support for changing the "base path."
• No support for changing Gollum options - all the default options are taken

Ensure that you clone to a directory called stoor, because the ENV variables adopt the name of the home directory.

To run the specs, create an application per "GitHub Authorization" above, and take note of the client id and client secret.

Then set up Stoor so that you are running with GitHub authorization. Authorize.

Now run the specs like so:

STOOR_GITHUB_CLIENT_ID=780ec06a331b4f61a345 STOOR_GITHUB_CLIENT_SECRET=f1e5439aff166c34f707747120acbf66ef233fc2 bundle exec rspec